TriboDyn 75W-140 Limited Slip Fully Synthetic Gear Oil - 1 Quart (946mL)
TriboDyn® Patented 75W-140 LS Fully Synthetic Gear Oil is a multi-purpose lubricant designed for service in Automotive, Industrial, & Heavy-Duty applications, and performs under the highest levels of extreme pressure, heat & stress. Is recommended for all street, truck & off-road vehicles, including all forms of high-performance racing, and other stationary & mobile equipment. Specifically designed for use in Limited Slip/Positraction Differentials & Wet Clutch Applications, manual transmissions, worm gears, power dividers, supercharges, oil lubricated wheel bearings, Transfer Cases, pumps, and all gearboxes.
TriboDyn® Patented LS Fully Synthetic Gear Oils are 100% synthetic superior base oils formulated into a complex mixture of extreme pressure lubricants combined with a “High Performance Coating Technology” that is engineered to minimize friction & wear, increase gear & bearing life, reduce operating temperature, perform under extreme pressure & heat, and provide extreme shock & high load protection. This unique formula also provides continuous protection by dispersing & clinging to critical areas without creating any drag, providing both start-up and continuous benefits while protecting against corrosion. The proprietary technology is an “Intelligent” material that is attracted to areas of heat, & friction, as pressures increase with RPM or load, the special lubricants combined with the active “Coating” technology in the oil can form a self-lubricating “Ceramic” film in high load & heat areas, providing critical protection that actively seeks out areas needing increased lubrication, and at times not simply reduce or eliminate wear, but can also repair damaged surfaces.
Applications: TriboDyn® Patented LS Fully Synthetic Gear Oil meets or exceeds the API GL-5, GL-4 Service Designations as well as the MIL-L-2105D and MIL-Prf-2105E, is designed for use in limited slip/positraction differentials, Mack GO-H & GO-J and Proposed PG-1/PG-2 Service Designations, Scania STO 110, Meritor -076N (75W90), and Meritor-076M (80W140), and API MT-1 applications. When extreme pressure (EP) gear oils are required. In all heavy-duty truck differentials - In all domestic automobile differentials and most manually shifted transmissions - In heavy-duty manually shifted truck transmissions requiring API MT-1 performance - In oil lubricated wheel bearings.
Fully compatible with all other synthetic & petroleum based gear oils.
Directions for use: SHAKE WELL BEFORE USING. Follow Equipment Manufacturer’s SAE weight, filling instructions, and recommended oil capacity. NOT RECOMMENDED FOR AUTOMATIC TRANSMISSIONS.
WARNING: Contains petroleum distillates. Avoid direct exposure. May cause skin or eye irritation. Ingestions may cause GI tract irritations or stomach discomfort. Inhalation of oil mists or heated oils may result in respiratory tract irritation. Slip hazard when spilled.
EYES - Flush with water for 15 minutes; get medical attention if eye irritation persists.
SKIN - Wash with soap and water get medical attention if irritation develops.
INGESTION - If swallowed, DO NOT INDUCE VOMITING - Rinse mouth with water; get immediate medical attention.
INHALATION - Remove exposed person to fresh air if adverse effects are observed; get medical attention if symptoms occur.